Indeco Lube automatic greasing systems
Among the most important accessories on hydraulic
hammers, automatic greasing systems developed
exclusively for Indeco by Bekalube technical staff are
designed to keep hammers in perfect working order, by
using just the right amount of lubricant and cutting out the
down times needed for the operator to carry out manual
greasing. There are two types of greasing unit – either
an on-board system that can be fitted directly onto the
hammer and which uses a cartridge pump, or else an
excavator-mounted unit with its own grease tank |6|.
In both cases, these systems are connected to the hammer
through a single centralized greasing point |7|, which
enables the lubricant to reach all of the bushings and the
moving parts at the tool, inside the hammers and on the
retaining axle.
On-Board greasing systems
• Single-shot cartridge pump works with only one
hydraulic line |8|, accepts the standard LubeMaxx
cartridge, and is recommended for hammers
HP 350 - HP 2000
• LubeMaxx Continuous-Flow greaser |9| is recommended
for hammers HP 3000 - HP 10000
• LubeMaxx XL Continuous-Flow greaser accepts two
standard LubeMaxx cartridges |10| and is recommended
for hammers HP 12000 to HP 25000
Carrier-mounted systems
• 1.6 gal hydraulically or electrically-operated tank
• 5.8/6.6 gal drumimmersion pump and hydraulic or
electric action
Special Indeco Supreme lubricant
It is vital that a specific lubricant be used to ensure the
durability of the main components of the hammer.
Indeco’s |11| Supreme lubricant, with solid additives is
particularly resistant to oxidation, can withstand extreme
pressures and temperatures and shows excellent adhesion
and water-resistance.
Pins and bushings
|12| Designed to make it easier to mount all Indeco
products onto the excavator boom, with or without a
mounting bracket.
Mounting brackets
Each Indeco mounting bracket model |13| can be used with
all Indeco products in the same class.
Folding mounting bracket
A special mounting bracket |14| for folding the hammer
away directly under the carrier boom.
Connecting hoses
We recommend using original Indeco high- and low-
pressure hoses |15| to connect various tools to the
hydraulic system on the carrier.
9 |
10 |
12 |
11 |
15 |
14 |
13 |