Hydraulic Shears
Indeco-Hydraulic-Shears
Shears and Rail Cutters
ISS and IRC Series
Vital tools for anyone working in the scrap metal or
recycling sectors, Indeco ISS Steel Shears stand out for their
cutting-edge design, for their extreme robustness and for
their technical innovations which substantially increase
their efficiency.
Rapid, efficient and surprisingly powerful, Indeco ISS shears
are the ideal choice for demolishing any type of metal
structure.
Indeco’s tried and tested continuous rotation hydraulic
system, found on all of our other rotating products, enables
the shear to work in the best possible position while its
large jaw opening, fast cycle times and its incredible cutting
power make all demolition operations fast and effective.
Special extra-strength HARDOX® alloy steel make ISS shears
outstandingly resistant and reliable. Each of the main knives
and guide-blades was designed with four cutting surfaces
so they can be rotated three times before replacement
thereby assuring more consistency, uptime and production
in your operation.
New addition to the range of Indeco products dedicated
to the recycling of ferrous materials, the IRC Rail-Cutting
Shears are hydraulic tools specifically designed for cutting
railway tracks, tramway rails, and underground rails,
made with heat-treated steel to withstand the enormous
forces. The special design of their jaws, combined with the
efficiency of the hydraulic system, and the sturdiness of the
structure in special HARDOX® steel, lets you cut rails up to
75 kg of mass per metre, with hardness up to 300 Brinell.
Two shear models available, IRC 20 and IRC 30, designed to
work on the various rail standards in the EU, USA, and Asian
countries.
ISS shears
IRC Rail Cutter
Features of Indeco
hydraulic shears
The regeneration valve |1| speeds up no-load movement of
the jaw, which opens and closes more quickly, thus reducing
cycle times and increasing productivity.
The chassis |2|, made from extra-strength HARDOX® alloy
steel, eliminates any flexing of the shear body.
The unique integrated dual guide system |3| can be used
to adjust the alignment tolerance of the jaw and prevents it
from buckling during the cutting stroke.
The interchangeable “quick change” wear bushings |4|
ensure that the knives are always optimally aligned.
The heavy-duty pivot group |5| provides long-term cutting
efficiency, keeps jaws aligned and prevents buckling.
The innovative design |6| improves cutting efficiency
compared to similar products.
The large jaw opening |7| provides greater flexibility for
numerous applications.
The special insert bushings |8| are made from an anti-friction
material with a dust seal.
The large, powerful hydraulic cylinder |9| is an exclusive
Indeco design, and provides enough force to deal with any
type of working conditions. Its long-lasting seals are able to
withstand up to 700 bars of pressure.
The baseplate for the ISS in fixed configuration |10| makes
the attachment much lighter and less bulky, which means
that a larger shear can be used on the excavator.
The shears have full high-speed 360° hydraulic rotation |11|
for better positioning and optimal cutting in any working
position.
The mounting bracket for the 2nd-member configuration
|12| is used to mount the ISS straight onto the excavator
boom. In this configuration, ideal for recycling ferrous
material, a large attachment can be mounted even on a
relatively light carrier.
The universal baseplate for 2nd member mounting brackets
|13| is compatible with all carriers.
The 3rd member mounting bracket |14| is used to mount
the ISS on the carrier stick (bucket-mounted), ideal for
demolition jobs.
The attachment plate |15| is compatible with the plate for
Indeco hammers of similar weight.
In the latest design |16|, the shear is more compact with
a thicker casing, thus improving its manoeuvrability and
balance, as well as increasing its overall robustness.
Innovative design
Pivoting
system
Integrated dual guide
system on jaw
Hydraulic cylinder
and its seals
Hydraulic
rotation
Hydraulic
rotation
Dust seal
on the bushings
Regeneration
valve
Attachment
plate
3rd member
mounting bracket
2nd member
mounting bracket
Large
jaw opening
Interchangeable
wear bushing
Universal baseplate
for 2nd member
mounting brackets
Casing in HARDOX®
steel
13
11
11
15
14
12
2nd and 3rd member configuration
New casing
design
16
Cutting capacity
The Indeco ISS shears have exceptional capacity and cutting
force, due to the following specific design features:
Four special steel blades, all the same size, fully
reversible and interchangeable, so that all of the
cutting edges can be used
Exclusive dual-profile piercing tip system with both
upper and lower blades, for a clean gradual cut as
the shear penetrates the material
Dual blade-guide system for
maximum precision cutting
Threaded screws on guide blade, to make it easier to
remove the blade if there is a blockage
Cutting register
adjustment system
provides efficient working
action at all times
Wear-resistant
high-strength
welding, standard
Guide blade with exclusive design which makes it
easier to dismantle
Exclusive dual-profile razor system with both upper
and lower blades, for a clean gradual cut as the
shear penetrates the material
Wear-resistant high-strength
welding, standard
Anti-shock, wear-resistant front
protections
Carrier key
Compact excavator
Miniloader
Backhoe loader
Wheeled excavator
Tracked excavator
ISS 2nd member
ISS 3rd member
ISS Fixed
Common configurations on the following models: ISS 5/7 - ISS 8/13 - ISS 10/20 - ISS 20/30 - ISS 25/40 - ISS 30/50 - ISS 35/60 - ISS 45/90
Technical Data
N.B. Weights may vary according to the various configurations. The information in this catalog is subject to change without notice and without any obligation or responsibility on our
part. The content of this catalog is provided as a courtesy to readers and constitutes non binding information only.
Type of carrier
Compatibility of attachment plate with hammer
HP 5000 ÷ HP 7500
HP 3000 - HP 4000
HP 1250
Min. excavator weight in fixed version
(boom-mounted) configuration
8800 lbs
13200 lbs
17600 lbs
Min. excavator weight in 2nd member
(boom-mounted) configuration
11000 lbs
17600 lbs
22000 lbs
Min. excavator weight in 3rd member
(bucket-mounted) configuration
15400 lbs
28600 lbs
44000 lbs
Attachment operating weight fixed version
1060 lbs
2300 lbs
4400 lbs
Attachment operating weight 2nd member
1250 lbs
2860 lbs
5280 lbs
Attachment operating weight 3rd member
1250 lbs
2750 lbs
5280 lbs
Maximum working pressure
4400 psi / 3200 psi*
5100 psi
5100 psi
Oil delivery
13 ÷ 32 gpm
24 ÷ 48 gpm
25 ÷ 55 gpm
Maximum rotation oil flow
3 gpm
4 gpm
5 gpm
Maximum rotation pressure
1650 psi
1650 psi
1650 psi
Length
67 in
83 in
107 in
Jaw width
13.4 in
16 in
18 in
Jaw opening
13.8 in
18.5 in
22 in
Max jaw depth
12.6 in
18 in
22.5 in
Maximum clamping force at tip
45 tons
80 tons
120 tons
Clamping force class
150 tons
300 tons
600 tons
Closure time
2 ÷ 3 s
2.9 ÷ 5 s
2.4 ÷ 4.6 s
Opening time
1 ÷ 1.6 s
1.5 ÷ 3 s
2.2 ÷ 4.2 s
*Low pressure version
ISS 5/7
ISS 8/13
ISS 10/20
Carrier key
Compact excavator
Miniloader
Backhoe loader
Wheeled excavator
Tracked excavator
ISS 2nd member
ISS 3rd member
ISS Fixed
Technical Data
N.B. Weights may vary according to the various configurations. The information in this catalog is subject to change without notice and without any obligation or responsibility on our
part. The content of this catalog is provided as a courtesy to readers and constitutes non binding information only.
Type of carrier
Compatibility of attachment plate with hammer
Min. excavator weight in fixed version
(boom-mounted) configuration
Min. excavator weight in 2nd member
(boom-mounted) configuration
Min. excavator weight in 3rd member
(bucket-mounted) configuration
Attachment operating weight fixed version
Attachment operating weight 2nd member
Attachment operating weight 3rd member
Maximum working pressure
Oil delivery
Maximum rotation oil flow
Maximum rotation pressure
Length
Jaw width
Jaw opening
Max jaw depth
Maximum clamping force at tip
Clamping force class
Closure time
Opening time
39600 lbs
50600 lbs
59400 lbs
44000 lbs
55000 lbs
66000 lbs
66000 lbs
88000 lbs
110000 lbs
7150 lbs
9900 lbs
12300 lbs
7920 lbs
11000 lbs
13860 lbs
8030 lbs
10560 lbs
13420 lbs
5100 psi
5100 psi
5100 psi
50 ÷ 80 gpm
55 ÷ 95 gpm
65 ÷ 105 gpm
8 gpm
11 gpm
13 gpm
1650 psi
1650 psi
1950 psi
134 in
138 in
159 in
22 in
26 in
27 in
26 in
30 in
33.5 in
27 in
30.5 in
34 in
140 tons
195 tons
210 tons
800 tons
1100 tons
1300 tons
ISS 20/30
ISS 25/40
ISS 30/50
2.8 ÷ 4 s
3.2 ÷ 5 s
3.6 ÷ 5.8 s
2.6 ÷ 3.8 s
2.8 ÷ 4.8 s
3.4 ÷ 5.6 s
HP 12000 - HP 14000
HP 12000 - HP 14000
HP 12000 - HP 14000
Common configurations on the following models: ISS 5/7 - ISS 8/13 - ISS 10/20 - ISS 20/30 - ISS 25/40 - ISS 30/50 - ISS 35/60 - ISS 45/90
Carrier key
Compact excavator
Miniloader
Backhoe loader
Wheeled excavator
Tracked excavator
ISS 2nd member
ISS 3rd member
ISS Fixed
Technical Data
N.B. Weights may vary according to the various configurations. The information in this catalog is subject to change without notice and without any obligation or responsibility on our
part. The content of this catalog is provided as a courtesy to readers and constitutes non binding information only.
Type of carrier
Compatibility of attachment plate with hammer
Min. excavator weight in fixed version
(boom-mounted) configuration
Min. excavator weight in 2nd member
(boom-mounted) configuration
Min. excavator weight in 3rd member
(bucket-mounted) configuration
Attachment operating weight fixed version
Attachment operating weight 2nd member
Attachment operating weight 3rd member
Maximum working pressure
Oil delivery
Maximum rotation oil flow
Maximum rotation pressure
Length
Jaw width
Jaw opening
Max jaw depth
Maximum clamping force at tip
Clamping force class
Closure time
Opening time
72600 lbs
92400 lbs
77000 lbs
99000 lbs
132000 lbs
198000 lbs
14960 lbs
21340 lbs
16500 lbs
24200 lbs
16720 lbs
22880 lbs
5100 psi
5100 psi
80 ÷ 145 gpm
95 ÷ 185 gpm
13 gpm
16 gpm
1950 psi
1950 psi
161 in
190 in
30 in
32 in
37.5 in
43.3 in
38.5 in
44 in
240 tons
275 tons
1500 tons
2500 tons
ISS 35/60
ISS45/90
3.6 ÷ 6.4 s
3.8 ÷ 7.2 s
3.2 ÷ 5.6 s
3.6 ÷ 7 s
HP 16000 - HP 25000
HP 16000 - HP 25000
Common configurations on the following models: ISS 5/7 - ISS 8/13 - ISS 10/20 - ISS 20/30 - ISS 25/40 - ISS 30/50 - ISS 35/60 - ISS 45/90
Appetite guide
Indeco shears are designed to cut and reduce the size of
the most common materials used in demolitions in the
mechanical, naval and construction sectors. The figures set
out below refer to cutting capacity under normal working
conditions. Results may vary according to such factors as
how robust the material to be cut is, what condition the
shear blades are in, the characteristics of the carrier and the
operator’s ability. Appropriate maintenance of the shear is
crucial for maximum productivity of cutting operations.
*Refer to mild steel tubing and not to other materials such as stainless steel, cast steel etc.
**Blade thickness affect the shear’s capacity to pierce sheet metal in various applications
***These figures may vary for beams of different shapes, thicknesses and material
N.B. All illustrations and numerical data in this catalog are purely indicative and subject to change at our discretion and without notice.
We therefore reserve the right to modify them with a view to improving and continuously developing our product.
ISS 5/7
ISS 8/13
ISS 10/20
ISS 20/30
ISS 25/40
ISS 30/50
ISS 35/60
ISS 45/90
0.8 in
5 IPE***
6 I BEAM (W)
4 HEA
0.8 in
2.5 in*
0.25 in**
2 in
13 IPE***
13 I BEAM (W)
10 HEA
2 in
10.5 in*
0.5 in**
10x10x3
1.4 in
8.5 IPE***
10 I BEAM (W)
8 HEA
1.6 in
8 in*
0.4 in**
8x8x2
4x4x0.8
2.8 in
16 IPE***
16 I BEAM (W)
12 HEA
2.5 in
13 in*
0.75 in**
12x12x4
4.6 in
22 IPE***
26 I BEAM (W)
16 HEA
4.5 in
22.5 in*
1 in**
20x12x5
4.2 in
20 IPE***
22 I BEAM (W)
14 HEA
4 in
19.5 in*
0.9 in**
18x12x5
5.7 in
24 IPE***
31 I BEAM (W)
18 HEA
5.5 in
28 in*
1.25 in**
24.5x12x5
3.6 in
18 IPE***
18 I BEAM (W)
13.5 HEA
3.5 in
17.5 in*
0.8 in**
16x12x4
JIS G3192
Features of Indeco
rail cutters
Cutters in special
hardened material
Attachment plate
3rd-member bucket
mounting bracket
2nd-member boom
mounting bracket
Full 360° hydraulic
rotation system
Efficient hydraulic
system
The ‘quick change’
interchangeable wear
bushings
Pivoting
system
Specific
claw design
Universal attachment
plate for 2nd-member
mounting brackets
13
10
11
12
2nd and 3rd member configuration
Structure
Maximum
opening
Hydraulic
cylinder
Structure |1| with an extremely robust design, entirely
made of HARDOX® 450 to withstand the strong stresses of
very heavy-duty work, and particularly compact to facilitate
coupling with machines with a wider weight range.
Large hydraulic cylinder |2|, to provide greater power and
to respond to the heaviest stresses, equipped with metal
alloy sliding components to ensure maximum reliability.
Wider maximum opening |3| than competitors, for greater
flexibility, being able to ‘process’ rails with the most diverse
profiles and dimensions on the global market.
The cutters |4| in special hardened material,
interchangeable and rotatable, can be used up to 4 times in
order to always have efficient cutting angles.
The specific design of the claws |5| and of the cutter profiles
enables the cutting of rails up to 75 kg mass per meter
(151 lb/yd) and up to 300 Brinell hardness.
The ‘quick change’ interchangeable wear bushings |6|
make it so that the cutters are always aligned optimally.
The exceptionally robust pivoting system |7| ensures
long-lasting cutting efficiency and keeps the jaws aligned,
preventing twisting.
Efficient and easily accessible hydraulic system |8|.
Full 360° hydraulic rotation system |9| for greater flexibility
and speed. Equipped with relief valves for flow and
pressure, it guarantees greater reliability, durability, and
positioning precision.
The attachment plate |10| is compatible with that of Indeco
hammers of the same weight.
The 3rd-member mounting bracket |11| lets you mount the
IRC on the carrier stick (bucket-mounted) of the excavator.
The 2nd-member mounting bracket |12| lets you mount the
IRC directly onto the excavator boom. In this configuration,
large equipment can be mounted even on a low weight
machine. The universal attachment plate for 2nd-member
mounting brackets is compatible with all excavators.
Carrier key
Compact excavator
Miniloader
Backhoe loader
Wheeled excavator
Tracked excavator
IRC 3rd member
Technical Data
N.B. Weights may vary according to the various configurations. The information in this catalog is subject to change without notice and without any obligation or responsibility on our
part. The content of this catalog is provided as a courtesy to readers and constitutes non binding information only.
Type of carrier
Compatibility of attachment plate with hammer
Min. excavator weight in 2nd member
(boom-mounted) configuration
Min. excavator weight in 3rd member
(bucket-mounted) configuration
Attachment operating weight 2nd member
Attachment operating weight 3rd member
Maximum working pressure
Oil delivery
Maximum rotation oil flow
Maximum rotation pressure
Length
Jaw width
Jaw opening
Max jaw depth
Maximum clamping force at tip
Clamping force class
Closure time
Opening time
35200 lbs
44000 lbs
44000 lbs
66000 lbs
6490 lbs
9650 lbs
6160 lbs
9240 lbs
5150 psi
5150 psi
53 ÷ 93 gpm
66 ÷ 106 gpm
7 gpm
8 gpm
1620 psi
1620 psi
93 in
104 in
26 in
29 in
8 in
9 in
8.3 in
9.1 in
430 tons
550 tons
770 tons
1000 tons
IRC 20
IRC 30
2.5 ÷ 4 s
3 ÷ 5 s
1.5 ÷ 2.5 s
2 ÷ 3 s
40 lb/ft
47 lb/ft
HP 3000 - HP 4000
HP 10000
Common configurations on the following models: IRC 20 - IRC 30
Rail (<300HB)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24