First page 1 Next page Last page

multiprocessor brochure

Welcome to interactive presentation, created with Publuu. Enjoy the reading!

Multiprocessor

IMP Series

Designed to ensure maximum versatility, the

Indeco IMP multiprocessor is the perfect solution

for specialist or non-specialist firms who need a

tool that can handle a variety of different jobsite

situations in the demolition and recycling field.

Different jawsets enable it to be used in the various

crusher, pulverizer, shear and Combi Cutter

configurations on the same carrier. Made with the

latest technologically advanced materials, such as

special extra-strength HARDOX® alloy steel, which

eliminates any flexing of the body, the Indeco IMP

multiprocessor is designed to withstand high levels

of pressure, wear and abrasion, and prolonged use

regardless of jobsite conditions. Unique features

such as the special design of the jaws, the tried

and tested rotation mechanism (found on all

Indeco rotating products) and interchangeable

teeth on the mobile jaw in crusher and pulverizer

configuration, help this product perform very well

in all applications. In “shear” configuration, some of

the unique features of the Indeco ISS shears have

been incorporated, such as the cutting geometries,

the blade configurations, and the exclusive piercing

system.

The new Combi Cutter jaws are particularly

well-suited for demolishing reinforced concrete

structures, as the tip is equipped with two

field-replaceable toothed plates, while extra-long

blades in the rear make cutting the steel rods inside

reinforced concrete even easier.

Multiprocessor

Indeco IMP

Characteristics of Indeco’s

multiprocessor

The full 360° hydraulic rotation |1|, with protection

valve, provides better demolition in all logistic

conditions and an always optimal grip.

The piston rods are equipped with steel protective

casing |2| for an optimal protection against

accidental damage during work.

Four different jaw kits |3| – crusher, pulveriser, shear,

and Combi Cutter – make the IMP useful in the

most diverse applications, from demolition work to

crushing to shearing metal structures.

The interchangeable cutters |4| can be used from

both sides in order to double their lifespan.

The single pivot point |5| makes maintenance and

tool kit replacement quicker and more effective.

The automatic greasing system |6| improves

the lubrication of the moving mechanical parts.

The teeth |7| are interchangeable in the crusher,

pulveriser, and Combi Cutter configurations.

The two large pistons |8| increase and balance the

demolition power.

The robust structure |9| features an innovative

design. The frame and jaws |10| are made of special

HARDOX® steel.

Full 360°

hydraulic rotation

Steel protection

for the piston rods

Interchangeable jaws,

available

in four

different kits

Interchangeable and

reversible cutters

Single pivot point

Automatic greasing system

Two large

pistons

Robust

structure

Interchangeable

teeth

Frame and jaws

in HARDOX®

IMP 35

IMP 45

IMP 15

IMP 20

IMP 25

Technical Data

Compatibility

Suggested uses on machines with an overall weight (in tons):

Type of carrier

IMP 15

IMP 45

IMP 20

IMP 25

IMP 35

12 ÷ 24 tons

425 mm

150 ÷ 250 l/min

350 bars

2 s

1 s

3/4”

20 l/min

110 bars

1/2”

HP 2000 - HP 2500

17 ÷ 36 tons

475 mm

180 ÷ 250 l/min

350 bars

2,5 s

1,2 s

3/4”

25 l/min

110 bars

1/2”

HP 3000 ÷ HP 4000

20 ÷ 45 tons

495 mm

200 ÷ 300 l/min

350 bars

3 s

1,5 s

3/4”

25 l/min

110 bars

1/2”

HP 3000 ÷ HP 4000

28 ÷ 55 tons

590 mm

220 ÷ 320 l/min

350 bars

4 s

2 s

1” 1/4

30 l/min

110 bars

1/2”

HP 5000

38 ÷ 65 tons

640 mm

270 ÷ 370 l/min

350 bars

4 s

2 s

1” 1/4

30 l/min

110 bars

1/2”

HP 7000 - HP 9000

Excavator weight*

Width

Oil delivery

Maximum pressure at cylinders

Closure time (no-load)

Opening time (no-load)

Hydraulic connections for cylinders

Maximum rotation flow

Maximum rotation pressure

Hydraulic connections for rotation

Mounting bracket compatibility

Excavator weight*

Width

Oil delivery

Maximum pressure at cylinders

Closure time (no-load)

Opening time (no-load)

Hydraulic connections for cylinders

Maximum rotation flow

Maximum rotation pressure

Hydraulic connections for rotation

Mounting bracket compatibility

Best

Possible (match subject to approval by the Indeco dealer)

N.B. All illustrations and numerical data in this catalog are purely indicative and subject to change at our discretion and without notice.

We therefore reserve the right to modify them with a view to improving and continuously developing our product.

Compact excavator

Miniloader

Backhoe loader

Wheeled excavator

Tracked excavator

*The operating weight of the equipment includes mounting bracket compatible with Indeco construction standards. Any differences in weight may be due

to a different mounting bracket configuration.

Carrier key

IMP - pulverizer configuration

IMP - shear configuration

IMP - Combi Cutter configuration

Jaw technical data

IMP - crusher configuration

Crusher

Pulverizer

Combi Cutter

Jaws for IMP 15

1500 Kg

1900 mm

1860 mm

815 mm

720 mm

595 mm

575 mm

120 mm

50 tons

230 tons

225 tons

Operating weight*

Maximum clamping force at shears

Height

Maximum opening

Jaw depth

Cutter blade length

Max clamping force at tip

Operating weight*

Maximum clamping force at shears

Height

Maximum opening

Jaw depth

Cutter blade length

Max clamping force at tip

Operating weight*

Maximum clamping force at shears

Height

Maximum opening

Jaw depth

Cutter blade length

Max clamping force at tip

Operating weight*

Maximum clamping force at shears

Height

Maximum opening

Jaw depth

Cutter blade length

Max clamping force at tip

Operating weight*

Maximum clamping force at shears

Height

Maximum opening

Jaw depth

Cutter blade length

Max clamping force at tip

Jaws for IMP 20

2080 Kg

2120 mm

2070 mm

910 mm

800 mm

660 mm

640 mm

120 mm

60 tons

65 tons

270 tons

280 tons

Jaws for IMP 25

2400 Kg

2450 Kg

2290 mm

2280 mm

1050 mm

850 mm

760 mm

700 mm

180 mm

95 tons

90 tons

340 tons

Jaws for IMP 35

3500 Kg

3600 Kg

2450 mm

2500 mm

1150 mm

1050 mm

860 mm

870 mm

180 mm

110 tons

390 tons

430 tons

Jaws for IMP 45

4500 Kg

4700 Kg

2660 mm

2730 mm

1250 mm

1150 mm

930 mm

950 mm

180 mm

130 tons

460 tons

480 tons

The distance between the

interchangeable cutters can

be adjusted, so that steel rods

inside reinforced concrete can

be cut more efficiently

The distance between the

interchangeable cutters can

be adjusted, so that steel rods

inside reinforced concrete can

be cut more efficiently

*The operating weight of the equipment includes mounting bracket compatible with Indeco construction standards. Any differences in weight may be due

to a different mounting bracket configuration.

Shear

1600 Kg

1950 mm

450 mm

500 mm

55 tons

220 tons

2200 Kg

2170 mm

500 mm

550 mm

540 mm

70 tons

270 tons

2600 Kg

2340 mm

550 mm

620 mm

600 mm

90 tons

330 tons

3700 Kg

2515 mm

640 mm

710 mm

120 tons

420 tons

4900 Kg

2760 mm

700 mm

780 mm

720 mm

140 tons

460 tons

490 mm

660 mm

Exclusive dual-profile

piercing tip system

in both upper

and lower tips,

for a clean gradual cut

Wear-resistant hardfacing, fitted

as standard

Longer blades cut the steel rods

inside reinforced concrete even

more efficiently

Four special steel blades:

all the same size, reversible

and interchangeable so that

all of the cutting edges

can be used

Interchangeable teeth

mounted on a bolt-on plate

with tooth sockets

Interchangeable teeth

mounted on a bolt-on

plate with tooth sockets

Interchangeable teeth

mounted on a bolt-on

plate with tooth sockets

Wear-resistant hardfacing,

fitted as standard

Wear-resistant hardfacing,

fitted as standard

Wear-resistant hardfacing,

fitted as standard

1600 Kg

1900 mm

860 mm

670 mm

50 tons

230 tons

230 mm

2200 Kg

2150 mm

960 mm

750 mm

230 mm

60 tons

270 tons

2600 Kg

2300 mm

1100 mm

860 mm

345 mm

95 tons

340 tons

3700 Kg

2450 mm

1200 mm

970 mm

110 tons

390 tons

460 mm

4900 Kg

2700 mm

1300 mm

1050 mm

460 mm

130 tons

460 tons

Appetite guide

Profiles and maximum dimensions that can be cut with the IMP in “Shear” configuration

Type

UNI

Type

UNI

UPN 100

90x90x8 mm

88,9x7,1 mm

IPE 120 mm

HEA 100 mm

40 mm

6 mm

Shear for IMP 15

Type

UNI

Type

UNI

UPN 120

110x110x10 mm

101,6x6,3 mm

IPE 140 mm

HEA 100 mm

45 mm

8 mm

Shear for IMP 20

Type

UNI

Type

UNI

UPN 160

120x120x12 mm

114,3x8 mm

IPE 180 mm

HEA 120 mm

50 mm

10 mm

Shear for IMP 25

Type

UNI

Type

UNI

UPN 180

130x130x12 mm

121x10 mm

IPE 200 mm

HEA 140 mm

55 mm

13 mm

Shear for IMP 35

Type

UNI

Tipo

UNI

UPN 200

150x150x12 mm

139,7x8 mm

IPE 220 mm

HEA 160 mm

60 mm

16 mm

Shear for IMP 45

Accessories

Indeconnect system

New remote monitoring system, based on the

principles of the Internet of Things, to prevent

equipment obsolescence and keep high

performance. The ‘Indeconnect’ system consists

of a device equipped with 4G technology for

a wireless connection to the network, to be

mounted on the equipment, and a cloud-based

web platform you can access from mobile devices

(with an app) or from PC, that lets you view the

data transmitted in real time by each installed

device: working hours, working position in space,

hydraulic oil temperature, ambient temperature,

GPS position, and more.

Through Indeconnect you can:

• Monitor productivity, making sure each Indeco

tool is working as intended

• Check operations, verifying in real time the various

internal and external parameters of the equipment

to make sure that it is used in optimal conditions

and correctly

• Increase security, by remotely checking the

position of the equipment through GPS

• Plan maintenance, monitoring the health of

each Indeco tool in real time, also through

the automatic alert and messaging system that lets

you order spare parts and reduce machine

downtime to a minimum

• Optimise rental, by supervising and monitoring

the management of rented equipment.

IMP| Multiprocessor

Application areas

IMP

Processing

• Scrap material processing

• Cutting tyres

• Processing rail cars

• Processing cars, trucks and general

automotive

• Cutting tanks

• Cutting of railway tracks, tramway rails,

and underground rails

• Scrap material handling

• Scrap material sorting

• Urban waste

• Industrial waste

• Wood and tyres

• Material downsizing and sorting in

recycling quarries

Handling and sorting

Downsizing and sorting

Light Demolition

• Demolition of masonry structures

• Brickwork

• Natural stone

• Renovation of interiors

• Autoclaved aerated concrete

• Primary demolition of lightweight and

standard concrete

• Primary demolition of heavyweight concrete

• Wall elements

• Secondary demolition

• Primary Demolition of Lightweight and Standard

reinforced concrete

• Primary demolition of heavyweight steel -

reinforced concrete

• Secondary Demolition floors, slabs and beams

• Separating rebars from

pillars and struts

• Fiber-reinforced concrete

• Cutting rebars and steel reinforcements

• Demolition of refineries

• Cutting of Metal and steel structures

• Cutting steel girders/beams

• Cutting reinforcements

• Sorting

• Loading

• Waste handling

• Site clean-up

• Asphalt

• Concrete

• Composite surfaces

Demolition of non-reinforced

concrete structures

Composite steel & concrete

structure demolition

Demolition of metallic

buildings and structures

Sorting and Loading

Pavement demolition

Demolition

& renovation

Recycling

Recycling of ferrous material

• Recycling of ferrous material

Trademarks used in this catalog are the property of their respective holders.

23-03-G-IMP-EN-01-01

INDECO ind S.p.a.

viale Lindemann, 10 z.i. - 70132 Bari - Italy

PH +39 080 531 33 70 - F +39 080 537 79 76

@ info@indeco.it - www.indeco.it/en

A U T H O R I S E D D E A L E R

CaruccieChiurazzi

*Crusher configuration - **Sorter configuration - ***Third-member configuration

The full range of other Indeco products

Products

Weight

IFP 8 X

IFP 13 X

IFP 19 X

IFP 28 X

IFP 35 X

IFP 45 X

IRP 11 X

IRP 5 X

IRP 18 X

IRP 23 X

IRP 45 X

IRP 36 X

IRP 29 X

1300 Kg

1800 Kg

2800

3450

4550

1700

2300 Kg

4500 Kg

3600 Kg

2950 Kg

IMP* 15

IMP* 35

IMP* 45

IHC 50

IMP* 20

IMP* 25

1500 Kg

3500 Kg

4500 Kg

200 Kg

2080 Kg

2400 Kg

1150

570

IHC 70

445

IHC 75

485

IHC 150

970 Kg

IHC 250

IHC R 50

425

IHC R 75

670

IHC R 70

630

IHC R 150

1185

IHC R 250

1520

IMG S** 400

IMG S** 300

380

285

IMG S** 600

570

IMG S** 1700

1610 Kg

IMG S** 1200

1140 Kg

IMG S** 2300

2180 Kg

IMG S** 2800

2650 Kg

ISS*** 8/13

ISS*** 10/20

1250 Kg

2400 Kg

ISS*** 5/7

570 Kg

ISS*** 25/40

4800 Kg

ISS*** 45/90

10400 Kg

ISS*** 35/60

7600 Kg

ISS*** 30/50

6100 Kg

IRC*** 20

IRC*** 30

4200 Kg

IMH 6

555 Kg

IMH 8

595 Kg

IMH 3

295

IMH 5

535

IMH 14

1045

IMH 10

735

IMH 20

1495

IMH 28

1540

IMH 4.2 SS

1400

IMH SG16

IMH SG20

840

ISS*** 20/30

3650 Kg

2800

1280

750

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16